Small austrian manufactory, providing the climbing world with wooden training equipment. Boads, poles, pegboards etc.
The Ant 3 is the Premiumboard from Antworks with skin friendly ash wood. It is the further development of the Ant 1. The Ant 3 is the Premiumboard from...
The Ant Hill is a pegboard of Antworks, fix vertically. The Ant Hill is a pegboard of...
The Ant Hill 63 is a pegboard of Antworks, fix horizontally. The Ant Hill 63 is a pegboard of...
The Strong Ant IV is a stand-alone trainingsboard. But also it can be used as an extension for the Strong Ant I and III. The Strong Ant IV is a stand-alone...
High quality pull bar as an attachment for the Strong Ant I and Strong Ant III. Can be mounted with the appropriate carrier plates (not included in the scope of delivery) but also on its own. Dimensions: The pull-up bar is 870mm wide and stands approx. 100mm away from the board/wall. Diameter: 4cm High quality pull bar as an...
Carrier Plates for Strong Ant IV and Ant Bar. Carrier Plates for Strong Ant IV and...
The Ant Enna is a high quality pull up bar and it is a training extension for the following Antworks products: Ant Hill 23 to Ant Hill 26, Ant Hill 63, Power Ant Mini and Strong Ant 2 Simply instert in the holes of the Peg / Combiboard Diameter of the bar is 40mm Made of brushed stainless steel Weight: 2,5Kg Scope of supply: 1x Ant Enna pull-bar The Ant Enna is a high quality pull...
The Strong Ant 2 is an entry-level Trainingsboard with large finger pads. The two included sticks can be inserted into four holes Pockets and finger holes on the front Expandable with ball handles and the Ant Enna pull up bar Material: ash Measurements: 80 x 15 x 5,6cm Weight: 3,9Kg Scope of delivery: 1x Strong Ant II, 2x sticks, fasteners and assembly... The Strong Ant 2 is an entry-level...
The Power Ant Mini is a Trainingsboard / Pegboard combination for beginners. The two included sticks can be inserted into six holes Grip depth between 20, 30 and 40mm Ergonomic handles Expandable with ball handles and Ant Enna pull up bar Scope of delivery: 1x Strong Ant II, 2x sticks, fasteners and assembly instructions The Power Ant Mini is a...
Ball handles for all Pegboards / Trainingboards with a drilling diameter of 41 - 42mm. Diameter in 80mm or 100mm Made from beech wood Knockers 80: 80 x 160mm; 0.9Kg Knockers 100: 100 x 180mm; 1.1Kg Scope of delivery: 1 pair of handles Ball handles for all Pegboards /...
High quality, self-rotating pull up bar by Antworks. For special training of the grip strength 60mm diameter Handmade from ash Dimensions: 94 x 9,0 x 6,0cm Weight: 2,5Kg High quality, self-rotating pull up...
The Arapiles Climbing Burger from Antworks is a completely new Trainingsboard design: Free-hanging volume with different sloper surfaces, finger ridges, finger holes, cracks and comfortable "jugs" Also suitable for crossfit training Made of cross-glued lime wood Measurements: 34 x 34 x 28cm Weight: 8.6 Kg Scope of supply: 1x Arapiles - Climbing Burger The Arapiles Climbing Burger from...
Paralletes by Antworks. Two different heights! Can be used with the BASE A as a chin-up bar. Material: Side panels are birch multiplex Beech stick 2 heights: 70mm flat 230mm upright Dimensions: 450mm pole length 40mm bar diameter Weight: 5.5 Kg Delivery: 2 mini bars 4 stainless steel screws 1 screwdriver TX40 Paralletes by Antworks. Two different...
With these special wall mounts, it is possible to use your Antworks Parallettes as a pull-up bar in a few simple steps, whether on a wall, roof pitch or ceiling. The hanging is the simplest. The Parallettes are simply pushed sideways into the holders and secured against slipping with the help of the two snapper. Finished. With these special wall mounts, it is...