The Core Trainingsboard is the ultimate training tool; a full range of holds from nice to nasty, skillfully created and evolved by climbers for climbers. Screw it on your woody, up in your attic or anywhere else where you might feel the urge to toughen up those fingers.
(Description from Core Climbing)
Easy and cheap Trainingsboard for beginners. It packs a powerful punch for its size and is a great training tool for applications with limited space. It's a middle weight contender that will keep your training session on the up and up!
Inexpensive trainingsboard with very ergonomic Slopern, brackets and holes!
In the U.S. Climbing Climbing Magazine selected as "Editors Choice".
With Linebreaker App Extended Activation Code for free!
Linebreaker CUBE, MONO+ and BOLT 4 holds in 3 different inclinations at least 7 different combinations of pinches for hanging or loading with weight With the Linebreaker BOLT for 30mm weight plates! Scope of delivery: Linebreaker CUBE + Linebreaker MONO+ + Linebreaker BOLT with a carabiner and nylon loop Linebreaker CUBE, MONO+ and BOLT 4...
Deep 1-Fingerpocket / Mono - For inclined and steep climbing walls Beech wood (only for indoor use) 1-Fingerpocket / Mono Application range: 0-90° Dimensions: 15x10x5 cm Weight about 100g Fastening: 3 pieces 5x40 spax screws Included in delivery: A hold without screws Deep 1-Fingerpocket / Mono - For...
1-Fingerpocket / Mono - For inclined climbing walls Beech wood (only for indoor use) 1-Fingerpocket / Mono Application range: 0-30° Dimensions: 11x10x5 cm Weight about 100g Fastening: 3 pieces 5x40 spax screws Included in delivery: A hold without screws 1-Fingerpocket / Mono - For inclined...
An XL hold made from the best beech wood. Positive enough for 70º walls. With carefully considered ergonomic design. Beech wood (only for indoor use) Jug Application range: 0-90° Weight about 300g Fastening: 1 pc. M10x60 cylinder head screw 1 piece 5x40 spax screw Included in delivery: A hold without screws An XL hold made from the best beech...
Deep 2-fingerpocket - Extremely comfortable and can also be used on very steep climbing walls! Beech wood (only for indoor use) Deep 2 finger hole Application range: 0-90° Dimensions: 20x10x4 cm Weight about 100g Fastening: 3 pieces 5x40 spax screws Included in delivery: A hold without screws Deep 2-fingerpocket - Extremely...
The personal challenge at the highest level! 6 strips in 3 pairs, 10mm, 8mm, 6mm As an add-on to your training board or as a "stand-alone Length: 13cm Material: Yellow Poplar Scope of delivery: 6 strips WITHOUT screws The personal challenge at the highest...
The Linebreaker "AIR"BASE: For those who do not have the possibility to attach their hangboard to a solid wall: The Linebreaker "AIR" ASE can simply be hung with a carabiner on a banister, beam, branch or the like!With app for Android and IOS! With Linebreaker App Extended Activation Code for free! The Linebreaker "AIR"BASE: For those...
Here the damage is greater than with the B-Stock: Either a handle is sanded or slightly damaged by a branch But it can also simply be a larger crack on the back wall or front side (the board still holds!) Or the entire surface is very rough and barrel-like! In the comments on the order, indicate which of the three restrictions you would like best! Here the damage is greater than with...
You want to give someone a gift, but prefer not to choose the gift yourself? Then our target10a shop voucher is ideal for you! You want to give someone a gift, but...
B-Stock: Full functional, but small damages on surface. The follower of the Skyboard, that was the first free-hanging Trainingsboard Perfect for quick hanging for training, warm-up bouldering, on vacation, etc Two different inclinations possible - to change the incline is possible in 5 seconds! Stable position of the board by special knots (no "tip over"... B-Stock: Full functional, but small...
Set of 2 wooden campus grips from target10a REDUCED REMAINING STOCK These are made of beechwood (the new Linebreaker GRIPS are made of yellow poplar) Perfect for system walls, home training walls or boulder walls As a supplement to a trainingsboard Skin-friendly curves and surface All holds can be used on both sides Pre-drilled for Spax screws WITHOUT... Set of 2 wooden campus grips from...
The Linebreaker PRO is the top training board for extreme climbers! The hold selection and hold depths are intentionally designed heavy. All edges are perfectly rounded for a skin- and joint-gentle training. The step design of the board prevents the unloaded fingers from bumping or resting on the board. With Linebreaker App Extended Activation Code for... The Linebreaker PRO is the top...
The Linebreaker AIR RAIL: For those who have no way of attaching their hangboard to a solid wall: The Linebreaker "AIR" RAIL can simply be hung with a carabiner on a banister, beam, branch or similar! With App for Android and IOS! The Linebreaker AIR RAIL: For those...
B-Stock: Full functional, but small damages on surface. The Linebreaker RAIL is a narrow and elegant Trainingsboard from target10a. Rounded holds offer skin-gentle strength training on finger holes, bars, slopers and jugs! Dimensions: 58cm x 4.5cm x 7cm Weight: approx.0.8 kg With App for Android and IOS! B-Stock: Full functional, but small...
The follower of the Skyboard, that was the first free-hanging Trainingsboard! Perfect for quick hanging for training, warm-up bouldering, on vacation, etc. Two different inclinations possible - to change the incline is possible in 5 seconds! Stable position of the board by special knots (no "tip over" of the board is possible)! With Linebreaker App... The follower of the Skyboard, that...
4 holds in 3 different inclinations at least 7 different combinations of pinches for hanging or loading with weight With the Linebreaker BOLT for 30mm weight plates! Scope of delivery: Linebreaker CUBE + Linebreaker BOLT with a carabiner and nylon loop 4 holds in 3 different inclinations...
B-Stock: Full functional, but small damages on surface such as cracks, scratches or repairs with wood kit. The damage is only visual - there are no restrictions on training!The Linebreaker BASE is the training board for beginners from. An ideal partner for getting started with climbing or bouldering training on the fingerboard.With app for Android and IOS! B-Stock: Full functional, but small...
B-Stock: Full functional, but small damages on surface such as cracks, scratches or repairs with wood kit. The damage is only visual - there are no restrictions on training! B-Stock: Full functional, but small...
The Linebreaker CRIMP is a trainingsboard with 9 bars of different sizes from 8mm to 40mm! There is a 55mm handle on the top! Due to the finely scaled bar depths, personal limits can be pushed further and further! The bars can be comfortably gripped with 4 or 5 fingers (CRIMP) - however, also only 2 or 3 fingers can be used. With Linebreaker App Extended... The Linebreaker CRIMP is a...
Linebreaker CUBE, MONO+ and BOLT 4 holds in 3 different inclinations at least 7 different combinations of pinches for hanging or loading with weight With the Linebreaker BOLT for 30mm weight plates! Scope of delivery: Linebreaker CUBE + Linebreaker MONO+ + Linebreaker BOLT with a carabiner and nylon loop Linebreaker CUBE, MONO+ and BOLT 4...
Trainingstool to increase grip strength for climbers and boulderers Deep 1-finger grip (mono) and 2-finger grip Can be used in three different inclinations (neutral, positive, negative) For hanging up or attaching weights! Dimensions: 10.5 x 6.5 x 2.5 cm (length / width / depth) Price is per piece and with cord - WITHOUT CARABINERS AND WEIGHTS! Trainingstool to increase grip...
Drive-In Nuts M10 for mounting climbing holds. Galvanized With 4 strike tips Height: 13 mm Drive-In Nuts M10x13 d[m]: 10,0 h[mm]: 13 s[mm]: 25 from 0,07€ per piece (see discounts) Drive-In Nuts M10 for mounting...
The campusrungs of target10a are perfectly rounded and beveled. Beechwood was used as material. The rungs of size M are 27mm wide and 45mm high. The length can be ordered variable. The standard length is 40cm. As mounting hardware 5 x 50 mm screws are suitable Mounting hardware is not included! Price is per piece Discount of 10% on purchase of 6 bars! The campusrungs of target10a are...
The target10a Linebreaker BASE is the Trainingsboard for beginners An ideal partner for beginners in climbing or boulder training on the fingerboard! Rounded holds offers a skin friendly training on pockets, bars, slopers and two jugs! With App for Android and IOS The target10a Linebreaker BASE is the...
With Dual-Profile: The campusrungs of target10a are perfectly rounded and beveled. Beechwood was used as material. The rungs of size L are 35mm deep. The standard length is 40cm. With two different sides attachable! As mounting hardware 5 x 60 mm screws are suitable Mounting hardware is not included! Price is per piece Discount of 10% on purchase of 6 bars! With Dual-Profile: The campusrungs of...
The campusrungs of target10a are perfectly rounded and beveled. Beechwood was used as material. The rungs of size S are 19mm wide and 37mm high. The length can be ordered variable. The standard length is 40cm. As mounting hardware 5 x 45 mm screws are suitable Mounting hardware is not included! Price is per piece Discount of 10% on purchase of 6 bars! The campusrungs of target10a are...
Hemispheres of wood for Campusboard or Systemwall Training. Material: Lime Tree Diameter: 130mm Height: 70mm Drilling Selection: For Spax Countersunk Head Screws 8x100m For Cylinder Head Screw M10x90mm Price per piece! Discount of 10% on purchase of 8 items! Mounting hardware not included! Hemispheres of wood for Campusboard...
ABC Spax galvanized Torx 4 x 50 threaded portion for securing campus bars Suitable for the following campus bars: Campusleisten Größe M ABC Spax galvanized Torx 4 x 50...
Spax-Screws galvanized Torx 5 x 35 threaded portion for campus rungs Suitable for campus rungs or climbing holds Spax-Screws galvanized Torx 5 x 35...
On orders over 50€ no shipping costs when delivery is within Germany!
Take a look at our Trainingsmagacine with tons of information on climbingtraining.
Here we have remaning stock ware or B-Ware with small flaws for reduced price!